Ramdoun offers a full range of water treatment systems to purify sea water of industrial, commercial and agricultural scale. Our units are manufactured to eliminate a large amount of salts and other minerals from sea water using RO systems and our filtration equipment works by using a high pressure salt water pump through semi-porous membranes that prevent salts and other organic matter from flowing through them. Membranes are only for the removal of dissolved solids while the water is converted to pure water and low concentrated salts. Salts and other organic matter are thrown into a saline stream and then pushed to the drain. In the end, water purification reaches less than 99% of dissolved salts. Marine water systems are highly capable of purifying TDS water RO seawater systems are usable anywhere from yachts to municipalities. It is important to choose the right materials from the construction to deal with sea water (which is highly corrosive). Ramdoon uses materials such as duplex SS 2205, SS 2207 Omonel, and SS904 to ensure longer service life and less maintenance. Ramdoun Company has extensive experience in sea water desalination worldwide. Our expert engineers are able to comply with all regions of the Kingdom. To benefit from our experience contact Ramdoun International today for expertise, outstanding service and quality.
the description Ramdoun manufactures a complete range of reverse osmosis seawater industrial systems designed for difficult or continuous service in marine locations and on the beach break. Our SWI series are available with capacities ranging from 8,000 to 1.300,000 gallons per day and the maximum feed water TDS of 42,000 ppm. We offer standard units as well as custom stations to suit all needs. We also manufacture these plants to suit many countries in the world. Application of SWI Series Desalination Plants in Saudi Arabia Reverse osmosis seawater (SWRO) and seawater desalination methods are the process of desalination of seawater using the reverse osmosis theory of seawater desalination which has been used commercially since the early seventies. SWI Series Reverse Osmosis Systems are designed to pass water through one phase and not several stages. For these systems to work properly, these systems should include the following components: Water source: Beach wells or on open beach. Pre-treatment: with pretreatment systems and chemical injection pumps High pressure pump: achieve the desired pressure Membrane and Vessel Group: Desalination PH adjustment: adjust the pH level Sterilization: Prevent any bacterial or organic growth RAMDON has manufactured and supplied several plants and reverse osmosis systems for brackish surface and groundwater seawater with a salinity of 45,000 ppm. Ramadan is ready and able to provide the best of modern desalination technology in industrial reverse osmosis systems for sea water.
Technical Specifications and Operating Methods: Maximum feed water temperature: 42 ° C The equipment can be upgraded to operate with soluble solids up to 50,000 ppm Hydrogen sulfide, turbidity and organic matter should be removed Salinity of inlet water: 10,000-42,000 ppm Operating pressure: 700 to 1,000 psi PH: 3-11 pH Feed water pressure: 40 to 80 inches Providing a deposition material for non-calcification of antiscalant PA0100 membranes The highest percentage of iron in water entering: 0.05 ppm Model
30.000L / day
5.000.000 L / day
TDS45.000 Standard Features The chassis is made of reinforced iron with high quality thermal dye 8 inch TFC type membranes provide a spiral shape designed for seawater 5 micron cartridge filter designed for sea water High pressure corrosion resistant pump designed for sea water Power supply 3Ph / 460V / 60Hz Pressure gauges before / after-filter, for pump and salt water Device meta tags High pressure pipes bear high pressure Corrosion resistant pressure valve is designed for high pressure Pretreatment is done to be checked before shipment Protection system when pressure is low or high as required Water flow meters produced and drainage, electric inlet valve, energy recovery system in systems with a productivity of more than 1,320.000 GPD the available choices PH or ORP flow meter • Recycle tank buoy Power supply • 380-415V / 3Ph / 50 Hz Automatic washing Wooden boxes designed for export Automatic filters UV sterilization system Chlorine measuring units Oil removal units Mixing system: Feeding / Product Dosing pumps Chemical Uses Ideal locations for industrial reverse osmosis systems include: Oil Tankers Islands Villages & Cities Cargo Ships Coastal Developments Hotels & Resorts Near Beach Seaside Working Boats Fish Processing Chalets & Villas Near Seaside Mixing system: feed / product Model number